MX-5 NAYoM 89-98
- MX-5 NA
  
  The MX-5 NA is the first generation of the Mazda MX-5 which is very easy to recognize thanks to its characteristic pop-up headlights.
- Year of manufacture: 1989 - 1998
  Motorisation: 1,6 Liter, 1,9 Liter
  Power: 90PS, 115PS, 131PS.
MX-5 NBYoM 98-00
- MX-5 NB
  
  The MX-5 NB is the second generation of the Mazda MX-5, which continues the philosophy of the MX-5 to be a light roadster and rear-wheel drive, but without the pop-up headlights of the predecessor.Characteristic here is the headlight with 2 chambers
- Year of manufacture: 1998 - 2000
  Motorisation: 1,6 Liter, 1,9 Liter
  Power: 110PS, 140PS.
MX-5 NB-FLYoM 00-05
- MX-5 NB-FL
  
  In December 2000 the facelift model MX-5 NB-FL was introduced with slight changes to the front, rear and a modified interior. It is also the first model with an automatic version. Characteristic here is the headlight with 2 chambers.
- Year of manufacture: 2000 - 2005
  Motorisation: 1,6 Liter, 1,9 Liter
  Power: 110PS, 139PS, 146PS.
MX-5 NCYoM 05-15
- MX-5 NC
  
  In October 2005, the MX-5 NC was introduced as the third generation of the MX-5. It is the first generation with a retractable hardtop version.
- Year of manufacture: 2005 - 2015
  Motorisation: 1,8 Liter, 2,0 Liter
  Power: 126PS, 160PS.
MX-5 NDYoM 15-
- MX-5 ND
  
  The fourth MX-5 generation shows sharp edges on the LED headlights and taillights. The cockpit of the MX-5 ND is kept very puristic with the three round instruments and knobs.
- Year of manufacture: 2015+
  Motorisation: 1,5 Liter, 2 Liter
  Power: 131PS, 160PS, 184PS.
MX-5 NAYoM 89-98
MX-5 NBYoM 98-00
MX-5 NB-FLYoM 00-05
MX-5 NCYoM 05-15
MX-5 NDYoM 15-
Shopping basket
My account

Shopping basket

Your shopping basket is empty

Manifold For MK3 1,8l and 2,0l

25.01.2012

Just in, still hot from welding are our new manifold samples for the MK3 with 1,8l and 2,0l engine. The maniflds will be ofered in several variations: 4 in 1 long version 4 in 1 short with 200 cell cat 4 in 2 in 1 The manifolds are all WIG welded and made from stainles steel. The manifolds are constructed so that the flow is optimized. Especially on the 4 in 1 pieces we constructed a small piramid in the collector for better flow. The installation was a breeze and everything fitted perfectly. At this moment the 4 in 1 with 200 cel cat is being tested on our test vehicle, so that we can inspect material quality while test driving. As soon as our dyno is repaired we will let the numbers do the talking.

To the news overview

Manifold For MK3 1,8l and 2,0l

Cookie declaration

We use cookies

Subscribe to Newsletter!

Stay tuned

Shopping basket

Item could not be added to your shopping basket