MX-5 NAYoM 89-98
- MX-5 NA
  
  The MX-5 NA is the first generation of the Mazda MX-5 which is very easy to recognize thanks to its characteristic pop-up headlights.
- Year of manufacture: 1989 - 1998
  Motorisation: 1,6 Liter, 1,9 Liter
  Power: 90PS, 115PS, 131PS.
MX-5 NBYoM 98-00
- MX-5 NB
  
  The MX-5 NB is the second generation of the Mazda MX-5, which continues the philosophy of the MX-5 to be a light roadster and rear-wheel drive, but without the pop-up headlights of the predecessor.Characteristic here is the headlight with 2 chambers
- Year of manufacture: 1998 - 2000
  Motorisation: 1,6 Liter, 1,9 Liter
  Power: 110PS, 140PS.
MX-5 NB-FLYoM 00-05
- MX-5 NB-FL
  
  In December 2000 the facelift model MX-5 NB-FL was introduced with slight changes to the front, rear and a modified interior. It is also the first model with an automatic version. Characteristic here is the headlight with 2 chambers.
- Year of manufacture: 2000 - 2005
  Motorisation: 1,6 Liter, 1,9 Liter
  Power: 110PS, 139PS, 146PS.
MX-5 NCYoM 05-15
- MX-5 NC
  
  In October 2005, the MX-5 NC was introduced as the third generation of the MX-5. It is the first generation with a retractable hardtop version.
- Year of manufacture: 2005 - 2015
  Motorisation: 1,8 Liter, 2,0 Liter
  Power: 126PS, 160PS.
MX-5 NDYoM 15-
- MX-5 ND
  
  The fourth MX-5 generation shows sharp edges on the LED headlights and taillights. The cockpit of the MX-5 ND is kept very puristic with the three round instruments and knobs.
- Year of manufacture: 2015+
  Motorisation: 1,5 Liter, 2 Liter
  Power: 131PS, 160PS, 184PS.
MX-5 NAYoM 89-98
MX-5 NBYoM 98-00
MX-5 NB-FLYoM 00-05
MX-5 NCYoM 05-15
MX-5 NDYoM 15-
Shopping basket
My account

Shopping basket

Your shopping basket is empty

Turbo Heatshield Endversion

04.01.2012

The endversion of our turbo heatshield arrived today and is ready for sale. We have used high quality materials and an optical clean design, just like with our samples. Now the heat stays in the turbocharger, where it belongs. It is a real simple idea. With hte heat shield other parts of the engine bay are protected from the later red hot turbine housing. Because of the heat reduction the exhaust temps are not cooling down, resulting in better response. The heat shield will fit our turbokit NA1-2017, but also fits on Garrett T3 and T25 chargers. The high quality materials will casue a little bit of smoke when used first time, but after a 15 minute drive with moderate speed it should be ready for use. the heatshield is just put on the turbine housing and fixated with 2 metal springs.

View

To the news overview

Turbo Heatshield Endversion

Cookie declaration

We use cookies

Subscribe to Newsletter!

Stay tuned

Shopping basket

Item could not be added to your shopping basket